Skip to main content
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to "walk" the LCD cable connector (labeled J19 in the service manual) out of its socket.

Press first on one side of the connector, then the other to push it free. Be sure to press the connector itself, not the socket on the motherboard.

Pull the cable straight out of its socket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.