Skip to main content
Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the communications board cable connector from its socket (labeled J49 in the service manual).

If you have a printer unit in your model, remove the printer power cable at this time, it is labeled J17 in the service manual.

Ваш вклад лицензируется под свободной лицензией Creative Commons.