Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

This step requires extreme caution to avoid snapping off the small black clip highlighted in the picture.

There is a small strip on the upper left of the screen that is connected to the logic board by a small black clip. It is highlighted in the picture.

Holding the screen and logic board together, use the plastic opening tool to push the clip into the up position as shown in the picture.

With the clip in the up position, remove the screen from the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.