Skip to main content
Помощь
Редактирование шага 18 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 153 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Slide the opening pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.

The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.

If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.

If the opening pick is getting stuck in the adhesive, "roll" the pick as shown in step 9.

Ваш вклад лицензируется под свободной лицензией Creative Commons.