Перейти к основному содержанию
Помощь
Редактирование шага 13 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Now that the lower edge of the board is free from the outer case, rotate the logic board toward yourself to expose its rear face.

The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components.

Carefully pull the optical drive connector away from its socket on the logic board.

Pull the connector perpendicular to the face of the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.