Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

If you have a floppy disk drive, it has a ribbon cable that runs over the heat-sink assembly that must be moved out of the way. To remove it, first unplug it from the system board by pulling on plastic pull ring.

The ribbon cable is fastened to the heat-sink assembly with four clips. Simply slide the ribbon cable out from under these clips and move the cable out of the way.

Ваш вклад лицензируется под свободной лицензией Creative Commons.