Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Unscrew 8 T10 screws from the cooling unit. NOTE: these screws are acctually allen keys. The prefered tool will be long handled allen keys. t10 are 2.74mm (closest allen key is 2.5 or 3mm) and t15 are 3.27mm(closest allen key is 3mm and 4mm). You may strip your tool or the actual screws themselves. Use a set of high quality long handled allen keys.

The screws are somewhat hidden, so they cannot be see in the picture.

To visualize the location of the screws look 3 steps ahead.

The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.

The last two images show another version of the LCS (out of the computer) in the G5 with off-center views to show the 8 screw holes.

Ваш вклад лицензируется под свободной лицензией Creative Commons.