Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Now you must remove the LED from the circuit board.

To do this you will need to use a soldering iron to detach to two pins of the LED from the board. They are the two pins in the lowest leftmost corner of the board.

Be careful to not touch any of the wires with the soldering iron. It might be helpful to remove those with the iron first to get them out of the way.

Once detached, pull the board straight up to remove.

Ваш вклад лицензируется под свободной лицензией Creative Commons.