Skip to main content
Помощь
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

Use a multimeter to test the potential difference across the components. You will have to reinstall the batter and turn the device on to do this.

Put one of the pins on each side of the component. Read the value on the meter.

Each resistor has a predefined value that can be found using this page. Compare the results to the expected values.

The capacitors have there properly functioning values printed on them.

If any values vary replace the component.

Ваш вклад лицензируется под свободной лицензией Creative Commons.