Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently lift the logic board.

Be careful not to pull too hard and damage the white ribbon cable.

Place the Spudger so that it is between the logic board, the white ribbon cable, and the rest of the camera.

Remove the white ribbon cable by pulling the Spudger away from the camera, keeping it parallel to the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.