Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip.

Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up.

Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.

Ваш вклад лицензируется под свободной лицензией Creative Commons.