Skip to main content
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

The original battery is soldered onto a protection circuit on a small external printed circuit board (PCB) where two wires (red and black) attach to the motherboard.

On the PCB, the red wire (positively charged) is soldered near the battery’s positive post. The black wire (negatively charged) is soldered near the battery’s negative post.

Determine the positive and negative posts on the new battery in order to correctly wire it to the PCB.

You may need additional wires to solder the (+) and the (-) of the new battery to the PCB in the same way the old battery installed.

Solder the new battery to the small PCB, as shown in the second image. The PCB is plugged (white plug)

Charge the battery with the USB receiver on the Cybook Odyssey before mounting the battery onto the unit.

Verify that the Cybook functions properly when the battery is charged and the USB cord is unplugged.

Ваш вклад лицензируется под свободной лицензией Creative Commons.