Перейти к основному содержанию
Редактирование шага 16 —

Тип шага:

Перетащите чтобы изменить порядок

Pull the final line from the "X"connector. Test it by pulling 10 to 15Hg of vacuum on it. This one is serving the rear passenger door, though as mentioned before it helps to verify by checking that door to ensure it locked after a vacuum is pulled.

If there is a leak in this line proceed by testing the line itself and the door lock actuator as described in Step 12.

Ваш вклад лицензируется под свободной лицензией Creative Commons.