Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Once the charger connector is pulled out, proceed with removing the logic board.

To remove the logic board, grip the four corners of the logic board and lift from the front inner case.

Notice the second picture the logic board has been turned over with the button side facing up.

Note: Upon reassembly the logic board must be placed correctly. The button side with the various circles should face down, lining up with the circular holes on the inner case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.