Перейти к основному содержанию
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector

Remove the heatsink clamps with a flathead screwdriver and do the same for the other side.

Lift off the heatsink and remove the 4 screws of the CPU board.

There are 4 pins: remove the 3 pins near the RAM but not the pin nearest You.

You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done.

Ваш вклад лицензируется под свободной лицензией Creative Commons.