Перейти к основному содержанию
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

At this point, the logic board is held onto the heat sink by thermal compound.

You may need to gently pry with a spudger to separate the logic board from the heat sink.

Be very careful not to bend and break the logic board.

Remove the logic board from the heat sink.

Ваш вклад лицензируется под свободной лицензией Creative Commons.