Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to disconnect the power supply DC-Out connector from its socket on the IO board.

Use the tip of a spudger to disconnect the power supply data cable from its socket on the IO board.

For both cables, make sure to pry straight up on the connector, and not the socket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.