Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Редактирование шага 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Carefully wedge a plastic card under the battery on the side nearest the logic board.

Do not pry against the logic board or you may damage the phone.

Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

If necessary, repeat the same procedure with the case side of the battery.

Ваш вклад лицензируется под свободной лицензией Creative Commons.