Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

While pulling the bottom down, remove the back of the camera.

Be careful not to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.

To disconnect the ribbon cable pull the small black tab upward and pull gently on the cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.