Помощь
Редактирование шага 12 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

This is a diagram of the keyboard ribbon clamp connector you will disconnect in the next step.

1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).

2) After disengaging the locking bar, slide the cable out of the connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.