Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Carefully separate the two sides of the casing by pulling each side apart as if opening a book. Do not be alarmed if the rubber volume control button falls out of the casing.

Lay the sides of the phone so they are open side up.

On the side of the phone with the logic board, locate the screw as indicated.

Use the T-6 screwdriver to remove the screw from this part of the board.

Note: Take special care not to lose the white washer that seperates the screw from the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.