Skip to main content
Помощь
Редактирование шага 2 —

Тип шага:

Перетащите чтобы изменить порядок

Pull out the 5 white pinhead connectors using an IC (Integrated Circuit) extractor. Pinch the IC extractor just under the top lip of the wire housing.

There are two 10 pin connectors, one 8 pin connector, one 7 pin connector, and one 2 pin connector.

When reassembling, there is only one way to reinsert the pinhead connectors. Make sure the orientation matches that of the receiving connector on the motherboard.

Ваш вклад лицензируется под свободной лицензией Creative Commons.