Перейти к основному содержанию
Помощь
Редактирование шага 10 —

Тип шага:

Перетащите чтобы изменить порядок

Apply heatsink onto the main chip or on the connection side of the fan.

Place the heat-sink over the GPU carefully, lining up any screws or clips.

Apply heatsink on thermal pads as applicable.

Use only a small amount of heatsink and spread evenly using a card, or apply pressure evenly when connecting components.

If there is thermal tape or pads that were removed for the reflow, place these back in their original position.

Ваш вклад лицензируется под свободной лицензией Creative Commons.