Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the three 9.0 mm Phillips screws holding together the firing chamber.

Remove the single 7.0 mm Phillips screw below the barrel.

Remove the two 14.0 mm Philips screws using a screwdriver with a length of approximately 4.0 inches and a diameter of approximately 0.2 cm.

Ваш вклад лицензируется под свободной лицензией Creative Commons.