Перейти к основному содержанию
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Flip the projector over.

Remove the two 77mm screws that are located nearest to the back panel ports. Use the T10 Torx screwdriver head.

Next, remove the two 10mm screws located near the lens side with the T10 Torx screwdriver head.

Flip the projector back over.

Lift up the main lid cautiously to avoid ripping the electrical ribbons.

Ваш вклад лицензируется под свободной лицензией Creative Commons.