Skip to main content
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Flip the projector right-side up and turn it so that the back ports are facing you.

Remove the 7mm metallic hex screws using the flat-head screwdriver.

Remove the two black 10mm screws using the T10 Torx screwdriver head. The screws are located at the center of the back panel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.