Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the five 5mm screws located throughout the motherboard with the screwdriver. Use the T10 Torx screwdriver head.

Pull up on each metal tab located at the rear of the projector. There are 5 tabs.

Do not pull up on the metal tabs too hard or too fast because they can break easily.

Ваш вклад лицензируется под свободной лицензией Creative Commons.