Перейти к основному содержанию
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the spudger to disconnect the ribbon cable from the display by the black pins away from the connector. There is a pin on either side of the connector.

Once both pins are released, the ribbon cable should slide easily out.

It may be easier if someone else holds the display so the cable does not get ripped out.

Ваш вклад лицензируется под свободной лицензией Creative Commons.