Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

Now it's time to begin working on removing the soft rubber hoses.

They connect to the caliper, and then to the hard lines at a bracket on the car.

You can see here where it connects to the caliper on the rear driver's side. It will be similar on all four calipers.

This is how they connect to the two front hard lines. They are located near the top of the inside of the fender wells.

And this is how they connect to the rear hard lines. Soft line already disconnected in this picture. They are located just behind the fender well, accessible through an opening.

Ваш вклад лицензируется под свободной лицензией Creative Commons.