Перейти к основному содержанию
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Take note of how the wires connect to the components to aid reassembly.

Remove the connectors (spaded lugs) from the circuit components as shown in the second image.

DO NOT pull on the wires, as you might pull them out of the connectors.

You should be able to remove each connector easily by hand. Pinch the lug between your fingers and pull in the direction of the attached wire.

If necessary, use needle-nose pliers to grasp the lug shank firmly. Gently pull the lug in the direction of the attached wire.

Gently bend the disconnected wires back and out of the work area.

Ваш вклад лицензируется под свободной лицензией Creative Commons.