Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Using your hands, grasp the wire that is still connected to the power supply. Carefully lift the power supply off the threaded stud to which it was coupled.

At this point you will have removed the following parts from the kettle:

Five (5) screws.

The kettle base.

One (1) 7/32'' hex nut.

One (1) 7/32" split-ring lock washer.

One (1) power supply unit.

Ваш вклад лицензируется под свободной лицензией Creative Commons.