Skip to main content
Помощь
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board.

The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

Ваш вклад лицензируется под свободной лицензией Creative Commons.