Перейти к основному содержанию
Помощь
Редактирование шага 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Touch the soldering iron tip to the solder in the upper right corner connecting the logic board to the battery lead.

Pull the battery lead out of the slot in the logic board. This must be done immeadiately after the solder melts.

Repeat for the solder to the left.

The logic board will now be completely free from the camera.

Ваш вклад лицензируется под свободной лицензией Creative Commons.