Skip to main content
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the four 3.5 mm T5 screws securing the heat sink to the logic board.

Grip both ends of the heat sink and lift it up from the logic board.

When installing the new heat sink, remember to replace the thermal paste underneath the heat sink.

Ваш вклад лицензируется под свободной лицензией Creative Commons.