Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

To perform this method of testing, you will need a reliable 12v power source. You could use a spare 12v battery and jumper cables. In this case, a battery "jumper" box was used.

If you are testing a glow plug that is new from the box, you can begin here.

If you are testing a plug that is currently in your engine to see if it is the bad plug, you will need to first remove it; see the glow plug replacement guide for advice on this process.

Start the test by gripping the body of the glow plug with the negative cable clamp.

Ваш вклад лицензируется под свободной лицензией Creative Commons.