Skip to main content
Help
Редактирование шага 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Important: when you reinstall a logic board, you'll need to replace the thermal paste that goes between the processor on the logic board and the heat sink. Failure to remove the old paste and apply a new layer can cause the computer to overheat and sustain damage. The following steps refer to replacing the thermal paste between the processor and heat sink; follow these steps only when you are ready to place the logic board in the computer.

Use a firm plastic edge to scrape the thermal material off the processor.

For more advanced instructions on this procedure, see our Applying Thermal Paste Guide.

Ваш вклад лицензируется под свободной лицензией Creative Commons.