Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту


Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

After removing you see a few wires and a screen placed on top of the circuit board looking similar to the first picture. If you don't, you might have not taken apart the wrong camera, yikes!

The second picture outlines where you can locate all the surface screws. Note that these will not be the only screws needed to be taken off to remove the circuit board.

As shown in the third picture be careful when removing the screw hidden behind the circuit.

Ваш вклад лицензируется под свободной лицензией Creative Commons.