Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the two black speaker screws shown in red circles in the first image using a Phillips #00 screwdriver.

After unscrewing the screws from the previous step, lift out the speaker plate when it becomes loose enough.

Open the multi-connector cover shown in the yellow square in the fourth image.

The multi-connector compartment is used to connect an AV cable to another device. The multi-connector has a waterproof cover and also allows the device to display pictures on a television screen.

The side panel that covers the multi-connector and the speaker can be detached by sliding the side panel off of the device.

Ваш вклад лицензируется под свободной лицензией Creative Commons.