Skip to main content
Help
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 41 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

In this step you will disconnect the battery to help avoid shorting out any components during service.

Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

Bend the battery cable slightly away from the logic board so the connector will not accidentally bend back and make contact with its socket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.