Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

During reassembly, check the clicking action on the trackpad.

The 1.4 mm T5 Torx screw near the front edge of the case must be adjusted correctly.

If overtightened, the button will cease to click at a certain point. Adjust the set screw until the clicking side of the trackpad has minimal play.

It's not necessary to remove this screw in order to remove the trackpad.

Ваш вклад лицензируется под свободной лицензией Creative Commons.