Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert a Spudger (or pushpin) into the top notch of the rubber cover, located on the top of the phone.

Press down and rotate the Spudger lifting the rubber cover. Remove and set cover aside.

Note: This will reveal a screw. Five screws should now be visible.

Using a T6 Torx screwdriver, unscrew all 5 screws and carefully set them aside.

Ваш вклад лицензируется под свободной лицензией Creative Commons.