Skip to main content
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Loosen the two Phillips #00 screws that are securing the hard drive compartment.

The screws are permanently attached to the hard drive compartment cover. Do not try to remove them completely.

Once the screws are sufficiently loosened, disconnect the clips holding the cover in place and slowly pull the cover away from the plastic chassis.

Ваш вклад лицензируется под свободной лицензией Creative Commons.