Перейти к основному содержанию
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

There is ribbon wiring under this PCB. Be careful not to damage it while removing the PCB.

Slowly lift the PCB away from the rest of the device

Remove the ribbon by first removing the brown insert piece from the connector on the button board

Pull the ribbon out of the connector on the button board by the blue tab.

Ваш вклад лицензируется под свободной лицензией Creative Commons.