Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

To remove the rear camera, use tweezers or the pointy end of your spudger to lift the glued down connector designated in the first picture.

Once the connector is released from the device, the rear camera can be taken out, as shown in the second picture.

After this step is complete, you can replace the rear camera with a new one in the spot on the device where the old camera was, as shown in the third picture.

Ваш вклад лицензируется под свободной лицензией Creative Commons.