Перейти к основному содержанию
Помощь
Редактирование шага 11 —

Тип шага:

Перетащите чтобы изменить порядок

Place the red probe on the positive terminal, and the black probe on the negative terminal.

If your range was set too high, you may not get a very accurate reading. Here the multimeter reads 9 volts. That's fine, but we can turn the dial to a lower range to get a better reading.

If you set the range too low, the multimeter simply reads 1 or OL, indicating that it is overloaded or out of range. This won't hurt the multimeter, but we need to set the dial to a higher range.

Ваш вклад лицензируется под свободной лицензией Creative Commons.