Перейти к основному содержанию
Помощь
Редактирование шага 13 —

Тип шага:

Перетащите чтобы изменить порядок

To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries.

Remember that you'll be testing the resistance of the entire circuit. If you want to test an individual component such as a resistor, test it by itself—not with it soldered in place!

Plug the black probe into the COM port on your multimeter.

Plug the red probe into the VΩmA port.

Ваш вклад лицензируется под свободной лицензией Creative Commons.