Skip to main content
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 14 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board.

Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board

Be sure to pry on the cable head, and not on the socket itself. Prying on the socket may cause it to separate from the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.