Перейти к основному содержанию
Редактирование шага 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Open the device between 90 and 100 degrees, then rest it on its side.

While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.

Repeat the same process for the identical bottom screw.

Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.

Ваш вклад лицензируется под свободной лицензией Creative Commons.