Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Tilt the display backwards. Grip the display from its base to reduce torque.

Use a spudger to pry the upper part of the back panel by pushing in the tabs located along its length.

This step is particularly tricky during reassembly, as the plastic must be perfectly aligned or it will not snap in. If it does not snap in correctly, the screen won't fit properly.

Carefully lift the display free of the case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.