Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.

Use the hot iOpener to cover half of the two right-most battery cells.

After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.

Ваш вклад лицензируется под свободной лицензией Creative Commons.